PAC is defined by the ASTM as particles passing through an 80-mesh sieve (0.177 mm), however Acro manufactures and enables to provide you size range from 324 mesh (0.043mm) to 200 mesh (0.075mm).

 

Generally , mesh size is around 325 mesh (0.043mm) after proceeded and PAC is mainly used to application of water treatment for absorbing organics or removing odors and colours. Absorption of PAC is effective but reactivation is difficult. Acro PAC product is developed specifically to provide our clients with a better economical solution.

Liquid Treatment : Purification of solvents, decolorisation, water treatment, beverage treatment, purification of pharmaceuticals.

Gas Treatment :  Removal of dioxide.

  1. Highly developed surface area than Granular Activated Carbon (GAC), PAC has faster reaction and better effectiveness.

  2. Lower industrial cost, no further preparation for carbon towers.

  3. Operational flexibility.

Type

C-W

 

Wet

Less dust

Applications:​

  1. Absorption of organics in the liquid (Ex. COD, ABS cleaner, Chloride, other contaminant).

  2. Decolorization and purification of wastewater and various solvents.

  3. Reduction of COD and toxic heavy metal ions.

C-500

Dry

Steam-activation

Applications:​

  1. Removal of Dioxins.

  2. Deodorant of waste water treatment and industrial water. 3.Reduction of COD and toxic heavy metal ions.

P

 

High volume percentage of mesopore and 

marcopore

Applications:​

  1. Absorption of organics in the liquid (Ex. COD, ABS cleaner, Chloride, other contaminant).

  2. Decolorization and purification of waste water and various solvents.

  3. Reduction of COD and toxic heavy metal ions.

CN

 

Less dust

Steam-activation Larger surface area Higher Iodine No.

Applications:​

  1. Removal of Dioxins.

  2. Deodorant of waste water treatment and industral water.

  3. Reduction of COD and toxic heavy metal ions.

Reactivation Service

Customisation

Carbon Delivery Services

Copyright © 2019 Acro Chemical Corporation All Rights Reserved